Fire Fighting Sprinkler Training Unit
General Description :
This is a standard 2-zone fire alarm system but specially adapted to function as a training unit. Components such as controls, detectors, warning devices and etc. is clearly labeled and systematically arranged on a study panel. The terminals of each component are brought out and terminated at 4mm terminal posts/sockets. Circuit construction can be achieved by interconnecting the desired components via plug-in connecting leads to form various complete functional circuits. This is an excel lent unit for students to study typical fire alarm and component parts as well as providing facilities for fault simulations and practical experience in troubleshooting.
Technical Specifications :
This unit consists of the following:
1 x Mobile Console
1 x System Control and Indicators
1 x System Connecting Points/Terminals
2 x Zone Indications (2 LED + 2 Toggle switches)
2 x Smoke Detector
2 x Heat Detector
1 x Flashing Lights
1 x Bell & Buzzers
2 x Panic Glass Break Emergency Switches
2 x Panic Glass Break Emergency Switches
1 x Water Pump and Tank
2 x Sprinkler
Mobile console consists of the following:
1 x Study Panel
1 x Working Bench Top
1 x Lower Cabinet with 3 Storage Drawers
4 x Castor Wheels
System Control and Indicators
This system consists of the following:
- 1 x Solid State Control Station
- 1 x Ammeter
- 1 x Voltmeter
- 25 x LED Monitor Lights
- 5 x Push Buttons
- 2 x Panel Fuses
- 4 x Toggle Switches
System Connecting Points/Terminals
This system consists of the following:
44 x Terminal posts / sockets 4mm
10 x Toggle Switches
Accessories to the following:
1 x Battery Charger/Reg. Power Supply DC 24V
1 x Set of connecting leads both ends fitted with 4mm stacking jack
2 x End of line resistor
1 x Standby Battery Set
Design concept based on didactic considerations.
Failure supervision for mains, charger and battery.
Fault supervisions for detectors and alarms.
Regulated DC Power Supply.
Compatible 2-wire Smoke and Heat Detector.
24V DC operation & solid state controls
Input
240VAC, 1 phase, 50Hz via input cable c/w 13A, 3-pin BS plug top.
