PROTECTION RELAY EXPERIMENT TRAINER

in

Features:

  1. Experiment projects are complete, experiment content is rich, design is reasonable, which are beneficial to broaden the students’ knowledge.
  2. Experimental device has excellent compatibility and scalability. Experimental installations adopt platform design, laboratory modules using component design School can based on teaching demand choose experimental module freely. If need to add depth and breadth of experiments, user simply need to add components.
  3. Experimental Device has strong intuitionist. Each relay is the abdomen – installed on the panel surface, students can clearly see the action of every relay, and are convenient to set relay values. At the same time, the relays and other components electrical diagrams of are painting on each panel, which are complete and consistent teaching materials, can help students understand the book knowledge, improve the experimental results.
  4. The experiments are strong package, the AC-DC power supply, instrumentation, relay and experimental connecting wire in experiment all fully equipped, school do not need to add any equipment to complete the experimental content.
  5. Experiment has authenticity. The relays used in experiment are relays which are currently using on-site power system, and better reflect the status of the power system, and lay a good foundation to engage in design, installation, debugging, maintenance and other work to for students after graduation for protection system.
  6. Structure is reasonable. The whole structure adopt a three-tier structure, panel ranking according to the actual line with the flow, experimental function block is clarity, carefully designing improve experimenter’s understanding of the system, wiring facilitate and the efficiency of the experiment.
  7. The experiment device has perfect protection measures. The device provides leakage circuit breakers and other physical security protection measures, Experimental lead adopts fully enclosed plastic wire to ensure the students’ operation safety. Various instruments and power supplies all have a perfect protection function.

Technical Specification:

1. Signal Relay
– Voltage: 220V
– NO Contact: 2 sets

2. Adjustable Single Phase
– Voltage: 0 – 240V
– Current: 1A

3. Bridge Rectifier
– Voltage: 1000V
– Current: 35A

4. Universal Change Over Switch
– Rated Current: 20A
– NO Contact: 4 sets

5. Simulate Switch Board
– Rated voltage: 240VAC
– Push Button: x 3 units

6. Current Relay
– Current: 1.25 to 5A
– NO Contact: 1 set

7. Negative Sequence Relay
– Input voltage: L1, L2 & L3
– Voltage: 220VDC

8. Time Delay Contractor
– Coil Voltage: 240VAC
– Contact: NO & NC
– Time: 0….60seconds

9. Intermediate Relay
– Voltage: 220VDC
– Trigger Current: 1A
– NO Contact: 2 sets
– NC Contact: 2 sets

10. Phase Analyzer
– Input: L1, L2 & L3
– To check phase voltage in correct / Incorrect sequence

11. Adjustable Three Phase
– Protection Fuse: 2A x 3 units
– Pilot Lamps L1, L2 & L3
– Fault Current Circuit Breaker 3 Poles
– Output: 0…..240VAC x 3 units
– Input: AC415V, 50Hz 3-phase

12. Timer Relay
– Voltage: 220VDC
– Time: 0.1s to 1.5s
– NO Contact: 2 sets
– NC Contact: 2 sets

13. Low Voltage Relay
– Voltage: 40V to 160V
– NO Contact: 1 set
– NC Contact: 1 set

14. Impulse Relay
– Voltage: 220VDC
– Current: 0.16A
– NO Contact: 1 set
– NC Contact: 1 set

15. Synchronous Detector
– Voltage: 220VDC
– Voltage: Compare: 110VAC
– NO Contact: 1 set
– NC Contact: 1 set

16. Flashing Relay
– Voltage: 220VDC
– NO Contact: 2 sets

17. Overload Relay
– Current: 8A to 16A
– NO Contact: 2 sets

18. Electronic Timer
– Start, stop and reset function

19. Contactor
– Voltage: 220VDC
– NO Contact: 2 sets
– NC Contact: 2 sets

20. Rheostat 100Ω/1kΩ
– Rheostat 1kΩ/100W
– Rheostat 100Ω/100W

21. Indicator and Buzzer
– Lamp Voltage: 240VAC
– Buzzer Voltage: 240VAC

22. Alarm Indicator
– Voltage: 240VDC

23. AC Voltmeter
– Range: 300V & 500V

24. AC Ammeter
– Range: 5A & 20A

25. DC Current & Voltmeter
– Voltage Range: 300V
– Current Range: 10A

26. Three Phase Bridge Rectifier
– Three Phase Bridge Rectifier
– Maximum Voltage: 400VAC
– Maximum Current: 10A

27. Fault Current Circuit Breaker
– Protection Fuse: 2A x 3 units
– Pilot Lamps L1, L2 & L3
– Fault Current Circuit Breaker 3poles
– Input: AC 415V,50Hz 3-Phase

28. Resistive Load
– Compose of three resistances with possibility to connect in star/delta or parallel, controlled by three switches with 7 steps variable per phase
– Max Power: 1200 watt
– 380/220Volt (Star/Delta)

Experiment Coverage:

  1. Current relay
  2. Voltage relay
  3. Electromagnetic Time relay
  4. Intermediate relay
  5. Signal relay
  6. Flashlight relay
  7. Three phase reclosing device
  8. Rectifier direction characteristic impedance relay
  9. Differential relay
  10. Power direction relay
  11. Anti-time over current relays characteristics
  12. 67-10KV Over-current protection circuit
  13. Low voltage start over-current protection and overload protection
  14. Break control loop with lighting surveillance
  15. Automatic reclosing accelerated protection
  16. Automatic reclosing after accelerate protection circuit
  17. Power direction over current protection
  18. Distance protection and direction stage-protection setting
  19. Overcurrent protection and automatic reclosing of three-phase experiment and evaluation
  20. Low voltage start over-current protection and automatic reclosing (after accelerating) integrative experiment and evaluation
  21. Current and Voltage instantaneous protection and automatic re-closing (after accelerating) integrative experiment and evaluation
  22. Overvoltage protection and automatic reclosing (after accelerating) integrative experiment and evaluation
  23. Three-phase current protection and automatic re-closing (after accelerating) integrative experiment and evaluation
  24. Over-current protection and automatic reclosing (accelerated) integrative experiment and evaluation
  25. Low voltage start over-current protection and automatic reclosing (accelerated) integrative experiment and evaluation
  26. Current at resia Voltage Protection and automatic reclosing (accelerated) integrative experiment and evaluation
  27. Overvoltage protection and automatic reclosing (accelerated) integrative experiment and evaluation
  28. Three-phase current protection and automatic reclosing (accelerated) integrated with the experimental evaluation

 

Accessories:

  1. U-link
  • For connecting junction point
  • 50 units
  1. Safety connecting lead
  • The set consist of 50 leads in 3 different coded colors and lengths chosen to allow the realization of all experiment.
  • Leads are capable of 32A current safety plugs.
  • Safety terminal socket: 4mm.
  • Red, 90cm (10 units)
  • Yellow, 30cm (10 units)
  • Blue, 60cm (20 units)
  • Black, 90cm (10 units)
  1. Vertical Frame
  • High level: DIN standard A4 with two shelves
  • Material: Aluminium
  • Side Frame: T shape
  • Size: 3-Layer 1450mm Length
  1. Experiment Manuals: 2 sets
  • Operation Manual (Hardcopy and Softcopy)
  • All manuals are written in English
  • Model Answer
  • Teaching Manual