ASP-DCOMS-23 DIESEL ENGINE WITH COMMONRAIL SYSTEM ON STAND (COMPLETE WITH SPECIAL TOOLS FUEL SYSTEM)
The Diesel Engine With Common rail System On Stand (complete with special tools fuel system) should have minimum requirement as below:
1.0 GENERAL SPECIFICATION / DESCRIPTION
1.1 For training and learning fully demonstrate the composition and working process of the vehicle diesel common rail system. Engine in stand with ignition switch, Instrument Panel, DLC to access use of Automotive Scanner.Completed system full function with starting system, fuel system, charging system, Oil Filter and exhaust system.
2.0 TECHNICAL SPECIFICATION
The set comprises:
2.1 Engine type: Diesel 4 cycle, vertical, 4 cylinders in line, direct injection.
2.2 Engine displacement : 2.4 – 3.0 liter.
2.3 Direct injection common rail system.
2.4 Turbocharger system with intercooler.
2.5 Bore x stroke (mm) 92.0 x 90.0
2.6 Valve mechanism 16-valve DOHC
2.7 Compression ratio 15.6:1
2.8 Max.power (bhp/kW @ rpm) 148/110 @ 3,400
2.9 Max.torque (Nm @ rpm) 400 @ 1,600 – 2,000
2.10 Can use scan tool for diagnosis.
2.11 Intake manifold assembly consist of complete with air cleaner.
2.12 charging system
2.13 Exhaust manifold.
2.14 Common rail sensors
2.15 Complete Engine wiring hardness, fuse box system, ignition system, immobilizer (IMMO)system, On-Board Diagnostic (OBD) socket.
2.16 Common rail ECU
2.17 Cooling System
2.18 Engine stand complete with four (4) heavy duty casters with lock
2.19 Starter System
2.20 Throttle pedal
3.0 ACCESSORIES
3.1 12V battery NS120.
3.2 SST Common rail system.(fuel high pressure system)
3.3 Fuel tank (min 5L capacity).
3.4 Digital Automotive Tablet Oscilloscope
Product Introduction
– 4 analog channel
– 100MHz bandwidth
– 1GSa/s real time sample rate
– 28Mpts memory depth
– Inside lithium battery
– Support test Charging circuit, starter circuit, sensor, actuator, ignition test, communication test (including CAN, LIN, Flexray, K, etc.), pressure test (cylinder pressure, intake and exhaust pressure, fuel pressure, etc.)
– Bandwidth limitation Full bandwidth, low pass
– I/O port Wi-Fi, LAN, HDMI, USB Host, USB Device, GND, DC Power
– Screen8″ TFT LCD 800*600 pixels display resolution, 14*10 grids
– Dimensions250*200*55mm
– Lithium battery, adapter, power cord, 4 x BNC banana lines, 4 x alligator clips, 4 x flexible needle, 2 x P130A probes.
– Blue casing
– Integrated automotive diagnostic software
Feature and Advantage
– Various automotive diagnostic functions: Ignition, Sensor, Actuator, Network, combination test and pressure test.
– Easy to use & operate in field, battery included.
– Support APP to operate oscilloscope remotely
– Support Wi-Fi to transfer waveform data
– Internal 8G memory to save waveform data
– 8 inches full touch capacitive screen, 800*600 pixels
3.5 Automotive Circuit Test Lead Kit Electrical Multimeter Test Leads
Product Information
– Widely Used: The complete kit transforms the test and measurement equipment into a powerful vehicle diagnostic tool, which is applicable to 12V and 24V vehicles, RVs, trucks, ships, etc., and can also be used in laboratories, homes and industries.
– Strong Compatibility: The automatic circuit tester tool kit contains 92 common leads and connectors, which can be used with any multimeter and oscilloscope probe extension line to make testing and inspection more convenient.
– Multifunction: Test lead kit is used to diagnose, test and repair complex vehicle circuits. It can also troubleshoot sensors, actuators and electronic circuits. It can be used to Hall effect, photoelectric signal, nozzle, solenoid valve group to transmit control signals of speed change and various wires.
– Stroboscope and Potentiometer: stroboscope is used to test the voltage and grounding signals of Hall sensor, fuel injector, solenoid valve, etc. 5KQ potentiometer (variable resistor) is used for engine cooling system, oil sensor, temperature tester and other components.
– Efficient: The test lead kit can accurately and quickly detect vehicle problems. When you need to check the parts, you can directly connect to the back of the terminal to avoid damaging the circuit. If you need to check the current, you don’t need to cut off the wire, just connect the wire to the circuit.
Specification:
– Material: ABS+PVC
Characteristic:
– When measuring the components, it can be directly measured from the rear of the harness plug terminal without damaging the line, so as to reduce the damage of the insulation rubber of the line, and thus reduce the impedance increase caused by the line rust.
– It is applicable to the extension line of any ammeter and oscilloscope probe to reduce the trouble of wiring when checking the line and help you to quickly detect.
– When measuring the current, it is not necessary to cut or disconnect the wires, but the wiring of the wire group can be used to reach the serial circuit.
– The variable resistance can simulate the hypothetical signal of the water temperature sensor, throttle position sensor element to the computer, saving the risk of replacing parts.
– It is equipped with two sets of lights, which can the control signals of Hall, photoelectric signal, fuel injector, solenoid valve, automatic transmission shift solenoid wire.
